Active Foaming Face Mask

Presperse Inc.

Water (aqua) 31.09%w/w
Disodium EDTA 0.02
Butylene glycol 2.00
Chondrus crispus (carrageenan) (Gelcarin PC-379, Earth Supplied Products) 0.56
Xanthan gum (Keltrol CG-T, Kelco) 0.28
Glycerin, 99% 2.00
Kaolin (Kaolin USP 2747, MPSI) 2.00
PEG-400 (Carbowax PEG-4 NF, Dow Chemical) 5.00
Talc (Talc NK-48, Presperse) 15.00
Talc (Talc PKP-53, Presperse) 10.00
Disodium laureth sulfosuccinate (Colamate DSLS, Colonial Chemical) 8.00
Decyl glucoside (Plantaren 2000, Cognis) 4.00
Saccharide hydrolysate (Farmal 2656, Cosmetic Specialties) 4.00
Glycolic acid (Glypure L, 70%, Dupont) 0.20
Chondrus crispus (carrageenan) extract (Gelalg, Presperse) 3.00
Phenoxyethanol (and) ethylhexyl glycerol (Euxyl PE 9010, Schulke & Mayr) 0.50
Fragrance (parfum) (Ginger Spice XBF-800060, IFF) 0.10
FD&C Blue No. 1, 1% aqua 1.00
FD&C Yellow No. 5, 1% aqua 1.00
Lactose (and) microcrystalline cellulose (and) chromium hydroxide green (and) tocopherol acetate (Cosmopheres GT-S, Presperse) 0.25
Polyhydroxystearic acid (and) isononyl isononanoate (and) ethyl hexyl isononanoate (and) PG-dimonium chloride phosphate (and) methyl perfluorobutyl ether (and) methyl perfluoroisobutyl ether (Phoenomulse CE-1, Pheonix Chemical) 10.00

Procedure: Combine A in the main mixing kettle at 20-30°C with a prop mixer at a low speed. Mix for 5-10 min or until solution is clear and free of solids. In a separate container, combine B at 20-30°C with a prop mixer at low speed. Mix for for 5-10 min or until mixure is homogenous. Conduct the same procedure for C, D and E (separately) as for B. Check pH and adjust to 5.5-6.5 with F. Add B to A with medium shear mixing at 20-30°C. Mix for 5 min. Heat batch to 85-90°C while mixing at low speed. Hold at 85-90°C for 5 min. Cool batch to 70-80°C. Add C and D separately to batch with medium shear mixing at 70-80°C, mixing for 5-10 min after each addition. Add E to batch with paddle or side sweep mixing at low speed and at 70-80°C. Mix for 5-10 min Do not aerate. Cool batch to 40-45°C with paddle or side sweep mixing low speed. Do not aerate. Add G in order to batch with paddle or side sweep mixing at low speed. Wait until each addition is fully dispersed before proceeding to the next. Do not aerate.

More in Skin Care