Matte Foundation

Posted: March 30, 2007

Company: MMP Inc.

A.
Water (aqua)	55.80%w/w
Disodium EDTA	0.10
Water (aqua) (and) montmorillonite (and) cetyl alcohol (and) glycerin (and) pentylene glycol (and) sucrose stearate (and) scleroglucan(Matte Lite Concentrate, MMP)	10.30
B.
Water (aqua)	10.00
Sucrose distearate (Sisterna SP30-C, MMP)	00.38
C.
Titanium dioxide	6.00
Red iron oxide (Colorcast Red MM, MMP)	0.50
Yellow iron oxide (Colorcast Yellow MM, MMP)	1.25
Black iron oxide (Colorcast Black MM, MMP)	0.13
Nylon 12	0.25
D.
Dimethicone (and) dimethicone/vinyl (Clearocast 200, MMP)	5.00
Isododecane (and) isononyl isononanoate dimethicone crosspolymer (Clearocast 500, MMP)	10.00
E.
Preservative	0.30

Procedure: Combine A in main vessel. Mix with medium prop agitation while heating. In side vessel combine B. Add B to main vessel at 60°C. Start homogenizing (6000-7000rpm). (C) Combine C with ribbon mixer until pigments are thoroughly combined. Add C to main vessel. When temperature is 55°C - 60°C, add D. Continue mixing with homogenizer until 50°C or until it builds viscosity. Start sweep mixing and cooling. At 45°C add E with any water loss through evaporation. Continue mixing and cooling. Shut down at 32°C.pH: 6.5.